Janty Neo Auto Airflow Battery - Black

Be the first to review this product

Availability: In stock

£16.95
OR
Quick Overview
The Janty NEO Auto Airflow Battery is furnished with our newly improved Auto Sensor Technology, giving you a smooth vaping sensation, while lasting from 6 to 8 hours of vaping on a single charge.

AIRFLOW edition:

With the Janty NEO Classic AIRFLOW Black Battery, you can use the golden airflow regulator (purchased separately, click here to see the product page) which is a small golden ring you screw onto your battery – once your Janty NEO Classic is fully assembled, you will then be able to screw this ring about 1.5 mm in either direction, minimizing, or maximizing the amount of airflow you get while vaping.

Janty Neo Auto Airflow Battery - Black

Double click on above image to view full picture

Zoom Out
Zoom In
Details
Janty NEO Auto Airflow Battery

  • 1x Janty NEO Auto Airflow Black Battery
  • Color: BLACK
  • mAh: 650
  • Puffs on a full charge: approx 650 puffs
  • Material of cylinder: Steel
  • Notice: Golden Airflow Regulator Ring not included


Color: BLACK

Color of LED: WHITE

Length: 75mm

Diameter: 14.0mm

Battery type: Automatic, regulated at 3.4 Vrms

Battery capacity: 650 mAh

Battery chemistry: Li-Po

Charging time: 2.5 hours

How many puffs: 720 puffs

Material of outside: 202 stainless steel

Battery charging cycles: more than 300 times

Warranty

Neo Classic batteries are covered by our Janty Warranty Program for 3 months from the delivery date.

 

Cleaning battery before charging:

Unscrew everything from the battery so you only have the battery itself in your hand, then gently with a soft cloth or paper tissue, wipe the inside of the screw thread area where you normally screw on your atomizer. If this spot is wet when you attach the battery to the charging unit, you could damage both.

Cleaning battery in general: Same method as above – rule of thumb is; Clean your battery / wipe it down, everytime you charge it.

Since auto batteries can be more sensitive to getting liquid inside than normal batteries, we typically recommend that when one of your batteries are not in use, put it upside down on a table – IF any liquid has found its way inside it, this will make that liquid seep out overnight.

 

 

Compatibilty:

This product is compatible with all Janty NEO Classic accessories and all eGo accessories, including chargers, batteries, atomizers, except for JETS-MX and eGo-X atomizers.

 

NOTE: Battery Safety

Use special caution when working with Li-ion cells, they are very sensitive to charging characteristics and may explode or burn if mishandled.

Make sure the user has enough knowledge of Li-Ion rechargeable batteries in charging, discharging and assembly before use.

Always charge in/on a fire-proof surface.

Never leave charging batteries unattended.

Never continue to use an e-cigarette if you can feel the battery get hot. If your battery gets hot to the touch, orif it begins smelling: DO NOT USE IT ANYMORE. Let it cool down (1 hour) in a safe environment (outside preferably), and dispose of correctly, or make arrangements to return, if still under warranty.

If your e-cigarette or device begins activating itself, immediately remove your atomiser and disconnect the battery. Do NOT trust the battery, nor the atomiser anymore from this point on. This means never leave either of the components connected in your pocket, in your nightstand, or out of visibility where you can not immediately separate the two components.

Read the information found at: Battery University before purchasing. It is important to carry batteries properly, charge properly, and dispose of properly.

iVapour Limited are not responsible for damage if there is any modification of the batteries/chargers in any form or shape (including pack making). We are not responsible for any damage caused by misuse or mishandling of Li-Ion batteries and chargers. We will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the use of any batteries.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.