Product Description
Contents:
1 x JANTY™ Portable Charger Case
1 x Instruction manual
Function:
1. When the casing is charged with an external power adaptor (output requires USB interface) or USB interface via the computer and the input is 5.0v, light C will show the corresponding state.
2. When the 1080mBH battery is charging, light C turns red. When the 1080mBH battery is fully charged, light C turns from red into green and the charging process is complete. Now your Dura or Mini Fogger battery can be charged. When you disconnect the external power adapter or the computer, light C will dim.
Note: Charging the casing 1080mBH battery takes about 4 hours.
When the voltage of the 1080mBH battery is down to 3.3V, LED B will turn red, indicating the battery needs to be recharged. At the end of the charging cycle LED A dims.
When the 1080mBH battery’s voltage is too low, LED B and C both turn red. LED dims automatically when the voltage of the 1080mBH battery’s charge reaches 3.3V. When the voltage reaches 4.2v, LED C turns green.
When you charge the DURA or Mini Fogger battery using the portable charger casing, the casing will measure the Dura or Mini Fogger battery voltage. In case the voltage is lower than 4.0v, within 8 seconds LED A will turn red indicating that it is being charged. The LED dims when the battery is fully charged.
How to check if the battery is fully charged at + 4.0v voltage?
LED A will dim when you open and close the casing.
How can you tell the status of the portable charger casing is idle?
When you close the casing, LED A dims.
What should you do when the voltage of your DURA or MINI FOGGER battery is lower than 4.0v and LED A does not turn red within 8 seconds?
Clean the inner side of the casing and contacts with purified alcohol.
A fully charged portable charger casing can fully recharge 4 Dura auto or Mini Fogger batteries.
Dimensions: 108mm x 44mm x 19mm approx.
6 month warranty.
1 x JANTY™ Portable Charger Case
1 x Instruction manual
Function:
1. When the casing is charged with an external power adaptor (output requires USB interface) or USB interface via the computer and the input is 5.0v, light C will show the corresponding state.
2. When the 1080mBH battery is charging, light C turns red. When the 1080mBH battery is fully charged, light C turns from red into green and the charging process is complete. Now your Dura or Mini Fogger battery can be charged. When you disconnect the external power adapter or the computer, light C will dim.
Note: Charging the casing 1080mBH battery takes about 4 hours.
When the voltage of the 1080mBH battery is down to 3.3V, LED B will turn red, indicating the battery needs to be recharged. At the end of the charging cycle LED A dims.
When the 1080mBH battery’s voltage is too low, LED B and C both turn red. LED dims automatically when the voltage of the 1080mBH battery’s charge reaches 3.3V. When the voltage reaches 4.2v, LED C turns green.
When you charge the DURA or Mini Fogger battery using the portable charger casing, the casing will measure the Dura or Mini Fogger battery voltage. In case the voltage is lower than 4.0v, within 8 seconds LED A will turn red indicating that it is being charged. The LED dims when the battery is fully charged.
How to check if the battery is fully charged at + 4.0v voltage?
LED A will dim when you open and close the casing.
How can you tell the status of the portable charger casing is idle?
When you close the casing, LED A dims.
What should you do when the voltage of your DURA or MINI FOGGER battery is lower than 4.0v and LED A does not turn red within 8 seconds?
Clean the inner side of the casing and contacts with purified alcohol.
A fully charged portable charger casing can fully recharge 4 Dura auto or Mini Fogger batteries.
Dimensions: 108mm x 44mm x 19mm approx.
6 month warranty.
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.